SATRA technical services for Construction Products
SATRA is a Notified Body under the EU Construction Products Regulation (305/2011), which applies to any construction product that is produced for permanent incorporation in building and civil engineering construction works.
Links & Resources
Construction products testing and certification at SATRA to ensure construction products meet appropriate industry performance and safety standards.
EU Construction Products Regulation (305/2011)
SATRA is a Notified Body under the EU Construction Products Regulation (305/2011), which applies to any construction product that is produced for permanent incorporation in building and civil engineering construction works. SATRA can undertake construction product testing of a wide variety of product types to enable companies to apply the CE Mark. Construction products include all types of floorcoverings ceramic tiles and ceramic tile adhesives, building hardware, thermal insulating products and reflective road studs.
Requirements and procedures
The Construction Products Regulation (CPR) details the preconditions and requirements for compliance, but it also describes procedures that manufacturers must follow in order to demonstrate how this is achieved. The process has five possible routes, known as Assessment and Verification of Constancy of Performance (AVCP), determined by the European Commission as being appropriate for a particular product or product family. These routes are split into two areas of responsibility – those of the manufacturer and those of a Member State approved third party assessment organisation known as a Notified Body. The complexity of the procedure and the involvement of the Notified Body depends on the degree of risk associated with the use of the product and its purpose.
All AVCP systems require the manufacturer to set up and maintain a factory production control system which may include a provision to undertake some product testing to check that they meet the basic work requirements. The extent to which manufacturers have to involve Notified Bodies is dependent on the product. The Notified Body may be required to undertake initial type testing, audit the factory production control system and certify product conformity depending on the AVCP system for that product.
Notified Bodies and certificates of conformity
When a Notified Body is involved it will produce an EC certificate of conformity or a certificate of factory production control to confirm compliance with the appropriate system, which enables the manufacturer to affix the CE mark.
SATRA is a Notified Body, approved for testing in specific construction product areas, such as floorings, thermal insulation products, adhesives, retroreflecting road studs and aspects of hardware for doors, windows, shutters and curtain walling. SATRA is also approved as a certification body for type examination and factory production control approval for resilient, textile and laminate floorcoverings (EN 14041: 2004) and retroreflecting road studs (EN 1463-1:1998).
For advice on CE marking products under the CPD, contact Jackie Glasspool on +44 (0) 1536 410 000 or email firstname.lastname@example.org